Yimei New Material-Professional Wax Product Solution Supplier

Do you know PE wax? Let's take a look at it


Release time:

2023-04-18

PE wax has no du, non-corrosive high strength, can be widely used in various fields. It has a high softening point and low melt viscosity, and has good moisture resistance at room temperature.

Do you know PE wax? Let's take a look at it

PE waxWith no du, non-corrosive high strength, can be widely used in various fields. It has a high softening point and low melt viscosity, and has good moisture resistance at room temperature.

PE wax According to the different manufacturing methods, PE wax can be divided into convergence type and cracking type. Polymerized PE waxes are typically made from by-products of high pressure polyethylene. Cracking high-pressure polyethylene should be cracked from transparent polyethylene resin or waste plastics to obtain white solid hydrocarbons with long carbon chains and carbon bonds. This is a synthetic wax with a wide range of uses.

Moreover, it has good wettability, permeability and fluidity, and can be used in conjunction with paints, coatings, inks, etc. It can produce practical effects of polishing, dispersion and smoothing. PE wax has good compatibility with other types of waxes and polyolefin resins. After the polyethylene wax is oxidized in the appropriate air, it will become an oxidized polyethylene wax with a calculated acid value.

PE wax manufacturers emphasize that the output rate of polyethylene wax is vein-like or filled in pores or crevices of rock formations, and the proportion of light yellow to brown-black solid to semi-solid appearance similar to liquid paraffin is lower. In particular, the composition is paraffin wax, which is malleable when heated. Cold Lake District is specially made from refined microcrystalline wax and good additives. He has good flexibility, adhesion and water resistance. It is an additive in the processing of fine craft candles.

From paraffin-based petroleum and paraffin naphthenic crude oil, in the process of stable seepage, due to the temperature drop and precipitation of crystals, there is a natural wax production. Some can improve the texture or luster of leather products, and some can cause polishing.

The particle size of the wax emulsion having a glossy effect is not specified and the composition is relatively simple. A layer of uniform and continuous wax film is formed on the surface of leather products. The film is very smooth in external economy and has a strong reflective effect on microwave, so it has texture. The particle size of the wax emulsion caused by polishing is relatively large, and the polyethylene wax produces an uneven and uneven surface layer on the surface of leather products, resulting in strong transmission of microwaves.

The manufacturer of PE wax said that in general, the production and extraction methods can be divided into the following aspects:

1. Melting method: the organic solvent is heated and melted in a closed high-pressure container, and then fed in a moderate refrigerated environment to obtain the finished product; Disadvantages: poor quality control, high actual operation cost, high risk, and some wax Not suitable for this method.

2. Emulsion method: fine and round particles can be obtained, which is suitable for water-soluble system software, but the added surfactant will affect the waterproof performance of the coating.

3. Dispersion method: Add the wax to the tree wax/water solution, and use a cement ball mill, drum or other dispersion mechanical equipment to disperse; Disadvantages: It is difficult to obtain high-quality products and the cost is relatively high.


Key words:

PE wax