Yimei New Material-Professional Wax Product Solution Supplier

Oxidized polyethylene wax manufacturers talk about the characteristics of polyethylene wax


Release time:

2022-11-21

Oxidized polyethylene wax: talk about the characteristics of polyethylene wax in detail Chemical resistance, electrical properties and wear resistance and temperature resistance, according to the differences in production and manufacturing methods, polyethylene wax is divided into two types: convergence type and cracking type. Convergent polyethylene wax is generally made from the by-products of high-pressure polyethylene. Cracked high-pressure polyethylene should be cracked from clear polyethylene resin or waste plastics to obtain white solid hydrocarbons with long carbon chains and carbon bonds. This is a synthetic wax with a wide range of main uses.

Oxidized polyethylene wax manufacturers talk about the characteristics of polyethylene wax

  oxidized polyethylene waxManufacturer: characteristics of polyethylene wax

Polyethylene wax with non-toxic non-corrosive strength is relatively large, can be widely used in various fields, softening point high melt viscosity low characteristics in the normal temperature state has good moisture resistance.

Chemical resistance, electrical properties and wear resistance and temperature resistance, according to the differences in production and manufacturing methods, polyethylene wax is divided into two types: convergence type and cracking type. Convergent polyethylene wax is generally made from the by-products of high-pressure polyethylene. Cracked high-pressure polyethylene should be cracked from clear polyethylene resin or waste plastics to obtain white solid hydrocarbons with long carbon chains and carbon bonds. This is a synthetic wax with a wide range of main uses.

Moreover, it has good wettability, permeability and liquidity, and can be used in combination with paint, coating, printing ink, etc. to produce practical effects of polishing, dispersing light and smoothing. Polyethylene wax has good compatibility with other types of wax and polyolefin resin. After proper air oxidation, polyethylene wax with calculated acid value will become oxidized polyethylene wax.

  oxidized polyethylene waxThe manufacturer emphasizes that the production rate of polyethylene wax is vein-like or filled in rock porosity or crevices, and the proportion of light yellow to brown black solid to semi-solid appearance is lower than that of liquid paraffin. Specific ingredients for solid paraffin hydrocarbon heating ductile. The cold lake region is specially made of refined microcrystalline wax with high quality additives. He has good flexibility, adhesion and water resistance. It is an additive in the processing of excellent craft candles.

From paraffin base oil and paraffin naphthenic crude oil in the stable seepage link, due to the temperature drop and crystal precipitation, there is a pure natural wax output rate. Some can enhance the texture or gloss of leather products, and some can cause the effect of polishing to show the charm of the leather layer.

The particle size of wax emulsion causing bright effect is not specified, and the composition is relatively simple. A layer of homogeneous and continuous wax film is formed on the surface of leather products. The film is very smooth on the external economy, causing a strong reflective surface effect on microwave, and then possessing texture. The particle size of wax emulsion causing polishing effect is relatively large. Polyethylene wax produces non-homogeneous and uneven surface in the external economy on the surface of leather products, A strong transmission effect on microwaves.

  oxidized polyethylene waxManufacturer: polyethylene wax production and processing methods detailed introduction

The production and processing methods of polyethylene wax are introduced in detail. Although there are many ways to use wax, there are still many silica fume wax. At present, there are many kinds of silica fume wax on the market, and the production process of each manufacturer is also different, which makes the particle size distribution, relative molecular mass, relative density, melting point, strength and other characteristics of silica fume wax in factories have some differences.

Oxidized polyethylene wax manufacturers show that generally can be taken to produce refined way can be divided into the following aspects:

1. Melting method: heating and melting with organic solvent under closed and high pressure utensils, and then feeding under moderate refrigeration environment to obtain finished products; The main disadvantages are that the quality is not easy to control, the actual operation cost is relatively high and the risk is relatively high, and at the same time some waxes are not comfortable with this method.

2. Emulsion method: fine and round particles can be obtained, which is suitable for water-soluble system software, but the added surface active agent will affect the water resistance of the coating.

3, dispersion method: the wax to add tree wax/water solution, the use of cement ball mill, drum or other decentralized machinery and equipment dispersion; the main disadvantage is difficult to get high-quality goods, and the cost is relatively high.

If you need oxidized polyethylene wax remember to consult our company.


Key words:

Oxidized polyethylene wax